A one-pot telescopic synthesis of benzo[b]carbazoles and exploration of their liquid crystalline properties.

We describe a diversity-oriented one-pot telescopic synthesis of various benzo[b]carbazoles with the naphthannulation of indoles as the key step, enabled by an intramolecular furan-olefin Diels-Alder reaction. This strategy is general and efficient across a wide range of substrates. We applied this method to synthesize and characterize the first benzo[b]carbazole-based liquid crystalline materials, where the unique molecular design led to the formation of a rare nematic phase at room temperature.

Ultrasensitive Detection of Lipid-Induced Misfolding of the Prion Protein at the Aqueous-Liquid Crystal Interface.

The misfolding of the α-helical cellular prion protein into a self-propagating ß-rich aggregated form is a key pathogenic event in fatal and transmissible neurodegenerative diseases collectively known as prion diseases. Herein, we utilize the interfacial properties of liquid crystals (LCs) to monitor the lipid-membrane-induced conformational switching of prion protein (PrP) into ß-rich amyloid fibrils. The lipid-induced conformational switching resulting in aggregation occurs at the nanomolar protein concentration and is primarily mediated by electrostatic interactions between PrP and lipid headgroups. Our LC-based methodology offers a potent and sensitive tool to detect and delineate molecular mechanisms of PrP misfolding mediated by lipid-protein interactions at the aqueous interface under physiological conditions.

Temperature-dependent hole mobility in pyrene-thiophene-based room-temperature discotic liquid crystals.

π-Conjugated pyrene-thiophene-based room-temperature discotic liquid crystals armed with four peripheral aliphatic chains are reported to study their potential use in a hole-transporting organic semiconductor. The charge carrier mobility studies using the ToF method revealed room temperature hole mobility in the order of 10-4 cm2 V-1 s-1 for both mesogens. However, the mobility values for compound 1a were observed in the order of 10-3 cm2 V-1 s-1 at high temperatures. Such molecular systems can potentially be used in nonlinear organic electronic applications.

High Electrical Conductivity and Hole Transport in an Insightfully Engineered Columnar Liquid Crystal for Solution-Processable Nanoelectronics.

Discotic liquid crystals (DLCs) are widely acknowledged as a class of organic semiconductors that can harmonize charge carrier mobility and device processability through supramolecular self-assembly. In spite of circumventing such a major challenge in fabricating low-cost charge transport layers, DLC-based hole transport layers (HTLs) have remained elusive in modern organo-electronics. In this work, a minimalistic design strategy is envisioned to effectuate a cyanovinylene-integrated pyrene-based discotic liquid crystal (PY-DLC) with a room-temperature columnar hexagonal mesophase and narrow bandgap for efficient semiconducting behavior. Adequately combined photophysical, electrochemical, and theoretical studies investigate the structure-property relations, logically correlating them with efficient hole transport. With a low reorganization energy of 0.2 eV, PY-DLC exhibits superior charge extraction ability from the contact electrodes at low values of applied voltage, achieving an electrical conductivity of 3.22 × 10-4 S m-1 , the highest reported value for any pristine DLC film in a vertical charge transport device. The columnar self-assembly, in conjunction with solution-processable self-healed films, results in commendably elevated values of hole mobility (≈10-3 cm2  V-1 s-1 ). This study provides an unprecedented constructive outlook toward the development of DLC semiconductors as practical HTLs in organic electronics.

Dynamic Microparticle Assembly at the Interface of Chemoresponsive Liquid Crystal Droplets.

The confinement of liquid crystals (LCs) in spherical microdroplets results in exotic internal configurations and topological defects in response to physical and chemical stimuli. Recent exploration into the placement of colloids on the surface of LC microdroplets has led to the design of a new class of functional materials with patterned surface properties. It is established that the placement of a colloid on a LC droplet surface can pin the topological defect at the interface, thereby restricting changes in the LC configuration. Herein, we build upon the handful of reports published to provide a fundamental understanding of the colloid positioning in response to external stimuli. Using polystyrene (PS) colloids, we explored the dynamics of particle self-assembly in response to an interfacial enzymatic breakdown of poly-l-lysine by trypsin. We found that for a significant population of droplets, the positioning of the colloid is unaffected by the changes in the internal ordering of LC. Inspired by the new observations, we delved deeper to understand the role of interfacial stabilizers in modulating the preferential alignment of LC and the placement of colloidal microparticles. We also demonstrated that for a certain population of droplets, the positioning of the colloids remains unperturbed in response to multistep reversible adsorption of interfacial amphiphiles. Our findings reveal interesting possibilities of correlating the stimuli-responsive switching of internal configurations of LC with colloid placement on the particle-decorated LC droplets.

Tailoring Chiral Discotic Liquid Crystals: Mesophase Engineering through Alternative Approaches and Chain Lengths.

Hydrogen (H)-bonding is crucial in constructing superstructures in chemical (such as chiral discotic liquid crystals (DLCs)) as well as in biological systems due to its specific and directional nature. In this context, we achieved the successful synthesis of two branches of heptazine-based H-bonded complexes using distinct strategies. Hpz*-Es-Cn , we incorporated chiral alkyl tails (Hpz-chiral) onto the central C3 symmetric heptazine core, connected to achiral benzoic acid derivatives (Es-Cn acid) through H-bonding. In Hpz-Es-Cn -acid*, we used an achiral heptazine derivative (Hpz-Es-Cn ) linked to a chiral acid via H-bonding. On the other hand, based on the DSC results, we observed that Hpz*-Es-Cn complexes exhibited three distinct phases, whereas Hpz-Es-Cn -acid* complexes displayed only a single mesophase. In polarized optical microscopy (POM) observations, all the complexes displayed birefringence at room temperature, with the color of the POM images changing as the temperature varied. X-ray diffraction (XRD) studies at lower temperatures confirmed that Hpz*-Es-C8 exhibited the columnar rectangular (Colr ) phase, while Hpz*-Es-C10/12 exhibited the columnar oblique (Colob ) phase. However, all the H-bonded complexes exhibited the columnar hexagonal (Colh ) phase at higher temperatures. The chiroptical spectra recorded by Circular dichroism (CD) highlight the specific observations in the columnar phase of two complexes, Hpz*-Es-C10 and Hpz*-Es-C12 . This behavior has potential applications in various fields, including sensors, displays, and responsive materials.

Architectural Effect on Self-Assembly and Biorecognition of Randomly Grafted Linear and Branched Polymers at Liquid Crystal-Water Interfaces.

Because of simple synthetic strategies, randomly functionalized amphiphilic polymers have gained much attention. Recent studies have demonstrated that such polymers can be reorganized into different nanostructures, such as spheres, cylinders, vesicles, etc., similar to amphiphilic block copolymers. Our study investigated the self-assembly of randomly functionalized hyperbranched polymers (HBP) and their linear analogues (LP) in solution and at the liquid crystal-water (LC-water) interfaces. Regardless of their architecture, the designed amphiphiles self-assembled into spherical nanoaggregates in solution and mediated the ordering transitions of LC molecules at the LC-water interface. However, the amount of amphiphiles required for LP was 10 times lower than that required for HBP amphiphiles to mediate the same ordering transition of LC molecules. Further, of the two compositionally similar amphiphiles (linear and branched), only the linear architecture responds to biorecognition events. The architectural effect can be attributed to both of these differences mentioned above.

Deciphering pressure-induced nanoarchitectonics in a monolayer of heterocoronene-based discotics at air-water and air-solid interfaces.

Understanding and control of molecular alignment at the nanoscale in self-assembled supramolecular structures is a prerequisite for the subsequent exploitation of molecules in functional devices. Here, we have clarified the surface-pressure induced molecular nanoarchitectures in a monolayer of a heterocoronene-based discotic liquid crystal (DLC) at air-water and air-solid interfaces using surface manometry, real-time Brewster angle microscopy, and real-space atomic force microscopy (AFM). Chloroform-spread DLCs at a concentration of ∼108 µM exhibit floating domains at the air-water interface comprising small aggregates of edge-on stacked molecules interacting via peripheral alkyl chains. Detailed analysis of surface manometry and relaxation measurements reveal that, upon compression, these domains coalesce to form a coherent monolayer which then undergoes irreversible structural transformations via mechanisms such as monolayer loss due to desorption and localized nucleation of defects. AFM images of the films transferred on a hydrophilic substrate reveal that with increasing surface-pressure, the nanoscale structure of the monolayer transforms from randomly oriented nanowires to tightly-packed nanowire domains, and finally to fragmented wire segments which diffuse locally above the film. These results provide a facile method for the preparation of compact, two-dimensional films of ambipolar DLC molecules with a tunable nanoarchitecture which will be crucial for their applications in nanoscale electronic devices.

Self-assembled discotics as molecular semiconductors.

With the advent of a new era of smart-technology, the demand for more economic optoelectronic materials that do not compromise with efficiency is gradually on the rise. Organic semiconductors provide greener alternatives to the conventional inorganic ones, but encounter the challenge of balancing charge carrier mobility with processability in devices. Discotic liquid crystals (DLCs), a class of self-assembling soft organic materials, possess the perfect degree of order and dynamics to address this challenge. Providing unidimensional charge carrier pathways through their nanoscale columnar architecture, DLCs can behave as efficient charge transport systems across a wide range of optoelectronic devices. Moreover, DLCs are solution-processable, thus reducing the fabrication cost. In this article, we have discussed the approaches towards developing DLCs as semiconductors, focusing on their molecular design concepts, supramolecular structures and electronic properties in the context of their charge carrier mobilities.

Liquid Crystal Biosensors: A New Therapeutic Window to Point-of-Care Diagnostics.

After revolutionizing the field of electro-optic displays, liquid crystals (LCs) are emerging as functional soft materials with wide-ranging biomedical implications. Integrating smart sensor designs with label-free imaging presents exciting opportunities in diagnostics. In this Perspective, we present an elegant collage of the key findings that demonstrate the utility of LC biosensors in diagnosing a disease or infection in clinical samples, cellular microenvironments, or bodily fluids. We emphasize the currently prevalent diagnostic techniques and the advances made using LCs in achieving greater sensitivity, a simplified strategy, multiplexed detection, and so on. We collate the landmark contributions in translational research in LC-based diagnostics. We believe that developing LC-based biosensors presents a new therapeutic window in point-of-care diagnostics.

Solution-processable organic light-emitting diodes utilizing electroluminescent perylene tetraester-based columnar liquid crystals.

Herein, we reveal a homologous series of liquid crystals involving perylene tetraesters as the core connected to the four trialkoxyphenyl units at the periphery using the triazole moiety as the linker. A thorough analysis using differential scanning calorimetry, polarized optical microscopy, and small- and wide-angle X-ray scattering studies confirm that all the mesogens 1a-c hold a stable enantiotropic columnar mesophase. Suitable molecular orbital levels and excellent material photophysical and thermal properties encouraged the study of their electroluminescent properties. Due to this, a well designed solution-processable organic light emitting diode device structure is configured as ITO (125 nm)/poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) (35 nm)/host: x wt% emitter (x = 0.5, 1.0, 3.0, 5.0) (20 nm)/2,2'2''-(1,3,5-benzinetriyl)tris(1-phenyl-1-H-benzimidazole) (TPBi) (40 nm)/lithium fluoride (LiF) (1 nm)/aluminium (Al) (200 nm) using compounds 1a-c as emitters. 4,4',4''-Tris[phenyl(m-tolyl)amino]triphenylamine (m-MTDATA) and 4,4'-bis(N-carbazolyl)-1,1'-biphenyl (CBP) were chosen as two different host materials. The current density-voltage-luminance and current efficacy-luminance-power efficacy plots suggest that m-MTDATA is a better host than CBP. Amongst, device based on 1 wt% emitter 1c doped in the m-MTDATA host matrix displayed the best performance, with a maximum power efficacy of 17.2 lm W-1, current efficacy of 18.5 cd A-1, and external quantum efficiency of 6.3%.

Elucidating liquid crystal-aqueous interface for the study of cholesterol-mediated action of a ß-barrel pore forming toxin.

Pore-forming toxins (PFTs) produced by pathogenic bacteria serve as prominent virulence factors with potent cell-killing activity. Most of the ß-barrel PFTs form transmembrane oligomeric pores in the membrane lipid bilayer in the presence of cholesterol. The pore-formation mechanisms of the PFTs highlight well-orchestrated regulated events in the membrane environment, which involve dramatic changes in the protein structure and organization. Also, concerted crosstalk between protein and membrane lipid components appears to play crucial roles in the process. Membrane-damaging lesions formed by the pore assembly of the PFTs would also be expected to impose drastic alterations in the membrane organization, details of which remain obscure in most of the cases. Prior reports have established that aqueous interfaces of liquid crystals (LCs) offer promise as responsive interfaces for biomolecular events (at physiologically relevant concentrations), which can be visualized as optical signals. Inspired by this, herein, we sought to understand the lipid membrane interactions of a ß-barrel PFT i.e., Vibrio cholerae cytolysin (VCC), using LC-aqueous interfaces. Our results show the formation of dendritic patterns upon the addition of VCC to the lipid embedded with cholesterol over the LC film. In contrast, we did not observe any LC reorientation upon the addition of VCC to the lipid-laden LC-aqueous interface in the absence of cholesterol. An array of techniques such as polarizing optical microscopy (POM), atomic force microscopy (AFM), and fluorescence measurements were utilized to decipher the LC response to the lipid interactions of VCC occurring at these interfaces. Altogether, the results obtained from our study provide a novel platform to explore the mechanistic aspects of the protein-membrane interactions, in the process of membrane pore-formation by the membrane-damaging PFTs.

Tailoring liquid crystals as vehicles for encapsulation and enzyme-triggered release.

Nanoscale assemblies of amphiphiles have been vividly explored in pharmaceutical formulations as drug nanocarriers. Aqueous interfaces of liquid crystals (LCs) are known to direct the self-assembly of a range of amphiphiles. These amphiphile-decorated interfaces of LCs have evoked interest for applications as diverse as the detection of disease markers, screening of toxins, mimicking complex biomolecular interactions, and cell-based sensing. Aiming to explore these interfaces for encapsulation and enzyme-triggered release, we report a simple and rational design of enzyme-responsive LC interfaces programmed with a cleavable non-ionic surfactant. We encapsulated a hydrophobic dye within the surfactant micelles and investigated the enzyme-triggered dye release. Interestingly, we found that LC droplets, when decorated with the dye-loaded micelles, offer significant advantages over the conventional micellar nanocarriers. The LC droplets showed controlled release features which weren't affected at high dilutions. Our work, although exploratory in nature, provides fresh approaches for tailoring LC interfaces as vehicles for drug delivery.

Observation of "de Vries-like" properties in bent-core molecules.

"de Vries" liquid crystals, defined by a maximum layer shrinkage of ≤1% from the smectic A to C phase transition, are an integral component of ferroelectric liquid crystal (FLC) displays. Bona fide de Vries materials described in the literature are primarily perfluorinated, polysiloxane and polysilane-terminated rod-like (or calamitic) LCs. Herein, for the first time, we report a series of newly designed achiral unsymmetrical bent-core molecules with terminal alkoxy chains exhibiting similar properties to "de Vries" LCs. The new molecular structure is based on the systematic distribution of four phenyl rings attached via ester and imine linkers having 3-amino-2-methylbenzoic acid as the central core with a bent angle of 147°. Detailed microscopic investigations in differently aligned (planar as well as homeotropic) cells along with SAXS/WAXS studies revealed that the materials exhibited a SmA-SmC phase sequence along with the appearance of the nematic phase at higher temperatures. SAXS measurements divulged the layer spacings (d-spacings) and hence, the layer shrinkage was calculated ranging from 0.19% to 0.68% just below the SmA-SmC transition. The variation of the calculated molecular tilt angle (α) derived from the temperature-dependent SAXS data, followed the power law with exponent values 0.29 ± 0.01 and 0.25 ± 0.01 for compounds 1/10 and 1/12, respectively. The experimental values obtained were very close to the theoretically predicted values for the materials with de Vries-like properties. The analysis of temperature-dependent birefringence studies based on the prediction of the Landau theory, showed a dip across the SmA-SmC phase transition typical of compounds exhibiting the de Vries characteristics. The collective results obtained suggest "de Vries" SmA as a probable model for this bent-core system which may find applications in displays.

Correction: Luminescent columnar discotics as highly efficient emitters in pure deep-blue OLEDs with an external quantum efficiency of 4.7.

Correction for 'Luminescent columnar discotics as highly efficient emitters in pure deep-blue OLEDs with an external quantum efficiency of 4.7%' by Joydip De et al., Soft Matter, 2022, DOI: 10.1039/d1sm01558c.

Luminescent columnar discotics as highly efficient emitters in pure deep-blue OLEDs with an external quantum efficiency of 4.7.

Development of materials that serve as efficient blue emitters in solution-processable OLEDs is challenging. In this study, we report three derivatives of C3-symmetric 1,3,5-tris(thien-2-yl)benzene-based highly luminescent room temperature columnar discotic liquid crystals (DLCs) suitable as solid-state emitters in OLED devices. When employed in solution-processed OLEDs, one of the derivatives having the highest photoluminescence quantum yield exhibited a maximum EQE of 4.7% and CIE chromaticity of (0.16, 0.05) corresponding to the ultra deep-blue emission. The finding is sufficiently significant in the field of DLC-based deep blue emitters.

Distinct interfacial ordering of liquid crystals observed by protein-lipid interactions that enabled the label-free sensing of cytoplasmic protein at the liquid crystal-aqueous interface.

Interfaces formed between a lipid decorated liquid crystal (LC) film and an aqueous phase can mimic the bimolecular membrane where interfacially occurring biological phenomena (e.g., lipid-protein interactions, protein adsorption) can be visually monitored by observing the surface-sensitive orientations of LCs. The ordering behavior of LCs at different phospholipid-based LC interfaces (1,2-dilauroyl-sn-glycero-3-phosphocholine (DLPC) and lysophosphatidic acid (LPA)) were investigated to determine the sensing of an important cytoplasmic protein (juxtamembrane of epidermal growth factor receptor (JM-EGFR)). At both DLPC and LPA decorated interfaces, the LC adopts homeotropic ordering, causing a dark optical appearance under crossed polarizers. Interestingly, upon the introduction of JM-EGFR to these LC-aqueous interfaces, the homeotropic orientation of the LC changed to planar (bright optical appearance), suggesting the potential of the designed system for JM-EGFR sensing. The use of different lipid decorated LC-aqueous interfaces results in the emergence of distinct optical patterns. For example, at a DLPC laden interface, elongated bright domains are observed, whereas a uniform bright texture is observed on an LPA laden interface. The DLPC decorated LC-aqueous interface is found to be highly selective for the sensing of JM-EGFR with a detection limit in the nanomolar concentration region (∼ 50 nM). When compared to spectroscopic and other conventional techniques, the LC-based design is simpler, and it allows the simple and label-free optical sensing of JM-EGFR at fluidic interfaces.

Probing Nanoscale Lipid-Protein Interactions at the Interface of Liquid Crystal Droplets.

Aqueous interfaces of liquid crystals (LCs) are widely explored in the design of functional interfaces to recapitulate the key aspects of biomolecular interactions in cellular milieu. Herein, using aqueous LC dispersions, we explore the interactions between mitochondrial cardiolipin and membrane-associated cytochrome c which play a pivotal role in the apoptotic signaling cascade. Conventional techniques used to decipher LC ordering at the droplet interface fail to give information about the interactions at a molecular level. Besides, owing to the complexity of LC systems and multiple determinants driving the LC reorientation, accurate analysis of the underlying mechanism responsible for the LC ordering transition remains challenging. Using a combination of atomistic simulations and microscopic and spectroscopic readouts, for the first time, we unveil the lipid-protein interactions that drive the reorientation at the LC droplet interface. The insights from our work are fundamental to the design of these interfaces for a spectrum of interfacial applications.

Molecular Engineering for the Development of a Discotic Nematic Mesophase and Solid-State Emitter in Deep-Blue OLEDs.

A unique strategy for the attainment of a discotic nematic (ND) mesophase is reported consisting of a central benzene core to which are attached two 4-alkylphenyl and two 4-pentylbiphenyl moieties diagonally via alkynyl linkers. The rotational nature and incompatibility of unequal phenylethynyl units led to the disruption of π-π interactions within cores that aids to the realization of ND phase and favors high solid-state emission. When used in OLEDs, compounds act as an efficient solid-state pure deep-blue emitter with Commission Internationale de L'Eclairage (CIEx,y) coordinates of (0.16, 0.07).

Luminescent Conductive Columnar π-Gelators for Fe(II) Sensing and Bio-Imaging Applications.

The high demand and scarcity of luminescent, photoconductive, and transparent gels necessitate its finding as they are potential components in photonic devices such as solar cell concentrators where optical losses via scattering and reabsorption require to be minimized. In this direction, we have reported highly transparent, blue luminescent as well as photoconductive gels exhibiting the hole mobility of 10-3 cm2/V s at ambient temperature as investigated by the time-of-flight technique. The π-driven self-standing supergels were formed using triazole-modified phenylene-vinylene derivatives as gelators in a nonpolar solvent. Different microscopic studies revealed its entangled network of interwoven fibrilar self-assembly and anisotropic order in the gel state. Supramolecular assembly of xerogels, studied by small- and wide-angle X-ray scattering (SAXS/WAXS) suggesting their local columnar hexagonal (Colh) superstructure, is beneficial for conducting gels. Rheological measurements direct the stiffness and robustness of the organogels. In addition, the gelators were developed as a sensing platform for the ultrasensitive detection of Fe(II) ions at ppb level. 1H nuclear magnetic resonance (NMR) titrimetric studies revealed that the interaction of the H-atom of triazole units with Fe(II) is responsible for quenching of blue fluorescence. Also, one of the gelators was successfully applied in bio-imaging using the pollen grains of the Hibiscus rosa-sinensis plant.